v. 1.13.1.22 portable Can only run against C:

Post Reply
wacojohn
Posts: 3
Joined: Tue Dec 01, 2015 3:37 pm

v. 1.13.1.22 portable Can only run against C:

Post by wacojohn » Tue Dec 01, 2015 3:46 pm

"Choose from multiple drives installed in your system"

http://dottech.org/133295/windows-revie ... t-program/

Not on my copy. Running on a W8.1-64 machine, ... but it only scans C:.
Clicked all over the place ... upper left corner in particular .. on the
General 'drive' icon ... but only C: presents.
​ Cannot select any other drive.​ I have other drives ... one USB connected directly to USB port and others USB connected to computer on a USB hub.
Capture.PNG
Capture.PNG (29.77 KiB) Viewed 4533 times
​Any ideas/comments??? Thank you in advance.​

Kyle_Katarn
Site Admin
Posts: 956
Joined: Sun Jul 03, 2011 8:13 pm

Re: v. 1.13.1.22 portable Can only run against C:

Post by Kyle_Katarn » Tue Dec 01, 2015 9:29 pm

May i see full screenshot (as failures are reported) ?

wacojohn
Posts: 3
Joined: Tue Dec 01, 2015 3:37 pm

Re: v. 1.13.1.22 portable Can only run against C:

Post by wacojohn » Wed Dec 02, 2015 7:13 am

Sure thing:
clip.PNG
clip.PNG (58.38 KiB) Viewed 4526 times
and here is the text report:
0x01 Raw Read Error Rate 0 200 51 000000000000
0x03 Spin Up Time 1458 ms 150 21 0000000005B2
0x04 Start/Stop Count 111 100 0 00000000006F
0x05 Reallocated Sector Count 0 200 140 000000000000
0x07 Seek Error Rate 0 200 0 000000000000
0x09 Power-On Hours Count 3013h 96 0 000000000BC5
0x0A Spin-up Retry Count 0 100 0 000000000000
0x0B Calibration Retry Count 0 100 0 000000000000
0x0C Power Cycle Count 107 100 0 00000000006B
0xBF G-Sense Error Rate 687 1 0 0000000002AF
0xC0 Power-Off Retract Cycle 53 200 0 000000000035
0xC1 Load/Unload Cycle Count 4536 199 0 0000000011B8
0xC2 HDD Temperature 39°C 104 0 000000000027
0xC4 Reallocated Event Count 0 200 0 000000000000
0xC5 Current Pending Sector Count 0 200 0 000000000000
0xC6 Off-line Scan Uncorrectable Count 0 100 0 000000000000
0xC7 UltraDMA CRC Error Rate 0 200 0 000000000000
0xC8 Write Error Rate 0 100 0 000000000000
0xF0 Head Flying Hours 2954 96 0 000000000B8A
0xF1 Total LBAs Written (32MB blocks) 230863563 200 0 000A0DC2B2CB
0xF2 Total LBAs Read (32MB blocks) 1979438869 200 0 000375FBD715
0xFE Free Fall Events 1 199 0 000000000001

Kyle_Katarn
Site Admin
Posts: 956
Joined: Sun Jul 03, 2011 8:13 pm

Re: v. 1.13.1.22 portable Can only run against C:

Post by Kyle_Katarn » Wed Dec 02, 2015 8:46 pm

Thanks !

The error is due to the "single" free fall event detected by your disk.

Regarding disks not detected, we have a bug identified on this, under investigation.

Kyle

wacojohn
Posts: 3
Joined: Tue Dec 01, 2015 3:37 pm

Re: v. 1.13.1.22 portable Can only run against C:

Post by wacojohn » Wed Dec 02, 2015 9:10 pm

Thank you. Will have to research the error. I have no idea what that answer means. A known bug is an acceptable explanation. Thank you again.

Kyle_Katarn
Site Admin
Posts: 956
Joined: Sun Jul 03, 2011 8:13 pm

Re: v. 1.13.1.22 portable Can only run against C:

Post by Kyle_Katarn » Thu Dec 03, 2015 9:12 pm

wacojohn wrote:Thank you. Will have to research the error. I have no idea what that answer means. A known bug is an acceptable explanation. Thank you again.
Thanks :)

Beddhist
Posts: 5
Joined: Wed Sep 04, 2013 7:42 am

Re: v. 1.13.1.22 portable Can only run against C:

Post by Beddhist » Fri Feb 03, 2017 9:33 am

Is this still a problem one year later? I am using the latest version 1.14.1.28 and it won't show or access my external Seagate 2TB Desktop drive.

Regards,
Peter.

Kyle_Katarn
Site Admin
Posts: 956
Joined: Sun Jul 03, 2011 8:13 pm

Re: v. 1.13.1.22 portable Can only run against C:

Post by Kyle_Katarn » Sat Feb 04, 2017 9:25 am

yes still under investigation.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests