v. 1.13.1.22 portable Can only run against C:

User avatar
wacojohn
Posts: 3
Joined: Tue Dec 01, 2015 3:37 pm

v. 1.13.1.22 portable Can only run against C:

Post by wacojohn » Tue Dec 01, 2015 3:46 pm

"Choose from multiple drives installed in your system"

http://dottech.org/133295/windows-revie ... t-program/

Not on my copy. Running on a W8.1-64 machine, ... but it only scans C:.
Clicked all over the place ... upper left corner in particular .. on the
General 'drive' icon ... but only C: presents.
​ Cannot select any other drive.​ I have other drives ... one USB connected directly to USB port and others USB connected to computer on a USB hub.
Capture.PNG
Capture.PNG (29.77 KiB) Viewed 14427 times
​Any ideas/comments??? Thank you in advance.​

Kyle_Katarn
Site Admin
Posts: 1267
Joined: Sun Jul 03, 2011 8:13 pm

Re: v. 1.13.1.22 portable Can only run against C:

Post by Kyle_Katarn » Tue Dec 01, 2015 9:29 pm

May i see full screenshot (as failures are reported) ?

User avatar
wacojohn
Posts: 3
Joined: Tue Dec 01, 2015 3:37 pm

Re: v. 1.13.1.22 portable Can only run against C:

Post by wacojohn » Wed Dec 02, 2015 7:13 am

Sure thing:
clip.PNG
clip.PNG (58.38 KiB) Viewed 14420 times
and here is the text report:
0x01 Raw Read Error Rate 0 200 51 000000000000
0x03 Spin Up Time 1458 ms 150 21 0000000005B2
0x04 Start/Stop Count 111 100 0 00000000006F
0x05 Reallocated Sector Count 0 200 140 000000000000
0x07 Seek Error Rate 0 200 0 000000000000
0x09 Power-On Hours Count 3013h 96 0 000000000BC5
0x0A Spin-up Retry Count 0 100 0 000000000000
0x0B Calibration Retry Count 0 100 0 000000000000
0x0C Power Cycle Count 107 100 0 00000000006B
0xBF G-Sense Error Rate 687 1 0 0000000002AF
0xC0 Power-Off Retract Cycle 53 200 0 000000000035
0xC1 Load/Unload Cycle Count 4536 199 0 0000000011B8
0xC2 HDD Temperature 39°C 104 0 000000000027
0xC4 Reallocated Event Count 0 200 0 000000000000
0xC5 Current Pending Sector Count 0 200 0 000000000000
0xC6 Off-line Scan Uncorrectable Count 0 100 0 000000000000
0xC7 UltraDMA CRC Error Rate 0 200 0 000000000000
0xC8 Write Error Rate 0 100 0 000000000000
0xF0 Head Flying Hours 2954 96 0 000000000B8A
0xF1 Total LBAs Written (32MB blocks) 230863563 200 0 000A0DC2B2CB
0xF2 Total LBAs Read (32MB blocks) 1979438869 200 0 000375FBD715
0xFE Free Fall Events 1 199 0 000000000001

Kyle_Katarn
Site Admin
Posts: 1267
Joined: Sun Jul 03, 2011 8:13 pm

Re: v. 1.13.1.22 portable Can only run against C:

Post by Kyle_Katarn » Wed Dec 02, 2015 8:46 pm

Thanks !

The error is due to the "single" free fall event detected by your disk.

Regarding disks not detected, we have a bug identified on this, under investigation.

Kyle

User avatar
wacojohn
Posts: 3
Joined: Tue Dec 01, 2015 3:37 pm

Re: v. 1.13.1.22 portable Can only run against C:

Post by wacojohn » Wed Dec 02, 2015 9:10 pm

Thank you. Will have to research the error. I have no idea what that answer means. A known bug is an acceptable explanation. Thank you again.

Kyle_Katarn
Site Admin
Posts: 1267
Joined: Sun Jul 03, 2011 8:13 pm

Re: v. 1.13.1.22 portable Can only run against C:

Post by Kyle_Katarn » Thu Dec 03, 2015 9:12 pm

wacojohn wrote:Thank you. Will have to research the error. I have no idea what that answer means. A known bug is an acceptable explanation. Thank you again.
Thanks :)

Beddhist
Posts: 8
Joined: Wed Sep 04, 2013 7:42 am

Re: v. 1.13.1.22 portable Can only run against C:

Post by Beddhist » Fri Feb 03, 2017 9:33 am

Is this still a problem one year later? I am using the latest version 1.14.1.28 and it won't show or access my external Seagate 2TB Desktop drive.

Regards,
Peter.

Kyle_Katarn
Site Admin
Posts: 1267
Joined: Sun Jul 03, 2011 8:13 pm

Re: v. 1.13.1.22 portable Can only run against C:

Post by Kyle_Katarn » Sat Feb 04, 2017 9:25 am

yes still under investigation.

scheff
Posts: 67
Joined: Tue Apr 16, 2019 3:00 pm
Location: DE

Re: v. 1.13.1.22 portable Can only run against C:

Post by scheff » Thu Jun 20, 2019 11:24 pm

Beddhist wrote:
Fri Feb 03, 2017 9:33 am
Is this still a problem one year later? I am using the latest version 1.14.1.28 and it won't show or access my external Seagate 2TB Desktop drive.
Hi Peter,

how is that external drive attached physically to which bus (i.e. USB, eSATA, SCSI, Ethernet, ...)?

And does Windows recognize it as removable media or as attached disk?

Beddhist
Posts: 8
Joined: Wed Sep 04, 2013 7:42 am

Re: v. 1.13.1.22 portable Can only run against C:

Post by Beddhist » Fri Jun 21, 2019 1:11 am

Hi scheff,

It was attached to USB2 on my laptop at the time, although it spent most of its days permanently connected to an SBC for backups. Windows uses it just fine.

Due to us moving I can't get to it until at least August, so I can answer only questions from memory.

Kind regards,
Peter.

Post Reply